A-A-50752A
2.1.13 Calibration procedures, digital radiometer. Detailed procedures to enable calibration of the radiometer sensor heads described in 2.1.12 shall be provided.
2.1.14 Carrying case for radiometer. The rugged case shall be suitable for the storing and transporting of the digital radiometer described in 2.1.12. The case shall protect the radiometer from moisture, dust, and shock.
2.1.15 Bi-metal thermometer. A stainless steel, bi-metal thermometer, shall be accurate to
+1 percent of the scale range. The thermometer shall be capable of measuring temperatures in a range of 0 °F to 220 °F in two-degree divisions. The stem shall be of the plain type (non-threaded) and approximately 8 inches in length. The dial shall have an approximate diameter of 2 inches.
2.1.16 Forceps, 2 each. The forceps shall be straight, blunt-pointed with serrated tips. The forceps shall be approximately 4 inches long and shall be fabricated from heavy steel.
2.1.17 Filter paper. A 100-pack of 7.0-centimeter (2.75-inch) diameter Whatman Grade 4 filter paper shall be provided.
2.1.18 Penetrant test kit carrying case. A rugged carrying case is required for storing and transporting the components of the penetrant test kit (see 6.1). The carrying case shall have a hinged cover capable of being securely latched to prevent accidental opening. The case shall incorporate a handle to enable hand carrying by one person. The carrying case shall be equipped with padded inserts that provide shock protection for the kit components. The inserts shall provide cut-outs/indentures to accommodate the individual kit components.
3. REGULATORY REQUIREMENTS
3.1 Recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4. PRODUCT CONFORMANCE PROVISIONS
4.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance.
4.2 Market acceptability. The product offered must have been previously sold either to the government or on the commercial market.
5. PACKAGING
5.1 Preservation, packing, and marking. Preservation, packing, and marking shall be as specified in the contract or order (see 6.5(b)).
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business